Error codes of the administration

The administration interface displays error codes in case of detected failures, which serve as a point of reference for the possible error.

Error code	Meaning
200	Syntax of IP address invalid
201	IP address already entered and active in the DB
202	SKR was deactivated at the machine
203	Network connection. Error in the structure -> _err_wsa_code is included when sent
204	Network connection - Error (connection established, then disconnected) -> _err_wsa_code is included when sent
205	Network connection OK However, no answer within the specified waiting time.
206	SKR is already active on the machine
207	The machine does not correspond to the machine in the local DB or the dongle file has got lost (when deleting the machine)
208	Network connection - Error (connection established, then disconnected) -> Reason: The machine is still connected to a network Open to the PollClient (e.g. if the socket connection at the PC is disrupted, the socket connection of the machine is still active) -> The problem then remains until the timeout of the machine = max 10-15 min.
209	The machine is entered in another SKR server (only Skr2)
210	(DB) Key not found when deleting the machine
211	Monitoring is active (or Poll thread is running) -> but should be OFF
220	McState is not AUTO_OFF
221	McState is not AUTO_ON
250	Access error to the User-Event table
251	Parameter error when accessing the User-Event table
280	This machine may only be accessed from SKR3 using the SKR3 protocol, not with the SKR2 protocol.
281	SKR3 protocol disabled on the machine = EVP expired
290	Error accessing the configuration table
291	Machine failure Runmode was not set to 3 by the machine
292	Internal error -> Poll-Thread could not be finished
293	Internal error -> RAM error
294	Internal error -> err_wsa_code is included when sent (SRV_ADMIN_RETURN_ERROR_WIN_STATE)
295
299	Cmd Syntax error