Import or export machine settings and network drives

You can export the machine settings and import them on other machines.

Machine Settings include the following settings:

Network Drives
  • Path specifications of the network drives

You will find these settings in the menu:

Configure Machine -> System Settings -> Data Management
-> Map Network Drives

  Carriage Speed
  • Reduced Speed
  • Quantity of knitting rows at reduced speed following a machine stop
  • Speed Outside the Knitting Area
  • Speed with Open Covers

You will find these settings in the menu:

Configure Machine -> Operational Settings -> Carriage

Various operational settings
  • Time, after which the lighting of the needle beds will be switched off.
  • Knitting program is included in the logfile
  • Horn (ON, OFF, Intermittent Tone)
  • Display of the Run-through Counter
  • Delayed Switch-off in Case of Power Failure
  • Technical View
  • Relieve the Fabric When Switching off the Machine

You will find these settings in the menu:

Configure Machine -> Operational Settings -> Miscellaneous

Vacuum
  • Vacuum Off Whole Needle Bed
  • Number of courses without suction
  • Number of courses with suction

You will find these settings in the menu:

Configure Machine -> Maintenance -> Vacuum

Clean Selection Systems
  • Direction of Cleaning Row
  • Number of courses until the selection systems are cleaned

You will find these settings in the menu:

Configure Machine -> Maintenance -> Cleaning

Manual Lubricating or Central Lubrication
  • Manual Lubricating
    • Quantity of system run-throughs after which the needle bed should be manually oiled
    • Machine stop after the maximum quantity of system run-throughs is reached
  • Central Lubrication
    • Quantity of system run-throughs until oiling the knitting area
    • Quantity of lubrication processes after which the entire needle bed will be lubricated

You will find these settings in the menu:

Configure Machine -> Maintenance -> Lubricating

Show Locked Menus
  • Show or hide locked menus

You will find this setting in the menu:

Configure Machine -> System Settings -> User -> Set Access Permissions

Waiting time for the screen saver
  • Waiting time for the screen saver

You will find this setting in the menu:

Configure Machine -> System Settings-> Display

Proceed as follows:

    1
    Make machine settings at a machine.
    2
    Export the machine settings.
    3
    Import the machine settings on the other machines.
    4
    All machines are working with the same machine settings.

Export the machine settings

Configure Machine -> System Settings
-> Data Transfer -> Machine Settings

The machine settings are exported with the following file name:
machinesettings.xml

Import the Machine Settings

During the import, you can choose if you want to import individual settings or all of them.

If a setting is inactive (1), it will not be imported, since this setting is not available in this machine (e.g. central lubrication).

Configure Machine -> System Settings
-> Data Transfer -> Machine Settings