The main take-down turns more slowly while the fabric is delivered

With some patterns the problem occurs that the fabric tears when the fabric is delivered from the comb to the main take-down. The reason is that the main take-down turns too fast and pulls too much on the fabric.
This problem occurs especially with high machine gauges, fine yarns and very narrow fabrics.

Remedy:
The previous "=^(n)=" command is extended with a speed specification (m) "=^(n,m)=".
The value (m) reduces the speed of the main take-down during the delivery of the fabric to the set percent value (50 to 100%).

Example =^(25,75)=
The delivering position (comb-main take-down) will be set to 25 mm lower.
The speed of the main take-down is reduced to 75% during the delivery of the fabric.