Central Lubrication

Starting from 06/2023, the CMS machines are equipped with a central lubrication as a standard equipment.
(not for: CMS 703, CMS 503, CMS 502, CMS 303, CMS 202).

Central lubrication on carriage, on the right: Oil supply
Central lubrication on carriage, on the right: Oil supply

The central lubrication lubricates with oil the working butts of all needle bed elements:

Lubrication points of the central lubrication
Lubrication points of the central lubrication

The oil pump can be found either on the left or on the right machine side depending on the machine type.

Notes:

  1. Adjust the central lubrication.
    Path: Configure Machine -> Maintenance -> Lubricating
    -> Central Lubrication
  2. Refill oil.
    If the content level is undershot then the Central lubrication oil reservoir almost empty message appears.
    Refill oil until the "Max" mark has been reached.
  3. Grease the coupling parts and the intermediate sliders.
    We recommend to grease the butts of the coupling parts and intermediate sliders even if the machine is equipped with central lubrication.
  4. Refer to the manual of the central lubrication unit.
    -> Enclosure on the control unit of the machine