Windows operating system of the CMS

The McNet program differs according to the Windows operating system of the CMS.
Depending on the version of the operating system, the network functionality can be installed already.

I. Determine the Windows operating system of the CMS:

    1
    Set machine main switch to 0. Set machine main switch to 1.
    -> The menu Boot Dialog appears on the touch screen.
    2
    Touch key Restart and Machine Configuration.
    -> After restart the window Machine configuration appears.

The type and the underlying Windows operating system are shown in the Control unit type line.
Thereby you can see the version of the McNet program.

Windows operating system of the CMS

McNet program

State

Windows XP

McNetXP

McNetXP installed ex works

Windows 95

MCNet2

You have to install McNet2 additionally

With the Windows XP operating system the McNetXP program is already installed and you can use the network functionality without an additional installation.

II. Check whether the network functionality is already installed:

  1. The CMS-TC machine is in the boot mode.
    1
    Press the Basic Configuration button.
    2
    Press the Network Settings button.
    3
    Change Network Settings? prompt Confirm (Change Network Settings?) with OK.
    Changes may cause a windows restart.
  1. The network functionality is already installed if the McNet dialog box appears.
    You can change the settings of the Network Settings and Advanced Network Settings section.