Configure the KnitLAN connection[Translation is no longer up to date]
The KnitLAN connection is used to transmit operating systems, data and pattern between the machine (OKC) and the M1 or any FTP server (FTP = File Transfer Protocol).
You can use the KnitLAN connection for:
- Installation of operating systems
- Transmitting knitting programs
- Monitoring production
- Collecting machine data
Requirements:
- Machine and M1 are networking
- Operating system of the machine: V 1.2 (or higher)
- Operating system of M1: V 3.9 (or higher)
Configure the KnitLAN connection:
|
Key |
Function |
|---|---|
|
|
Call up the Service menu |
|
|
Call up the Basic settings menu |
|
|
Call up the Network configuration window |
|
|
Opens the substructure of the marked network. |
|
|
Closes the substructure of the marked network. |
|
|
Transfers the selected computer in the field KnitLAN / ftp |
|
|
Deletes the selected computer |
|
|
Call up the Main menu |
- 1
- Call up the Service menu
- 2
- Call up the Basic settings menu.
- 3
- Call up the Network configuration window
- 4
- From the entire network (1) select the computer of the M1.
If only the entire network is displayed, then open the substructure with the (2) key. - 5
- Transfer the selected computer in the field KnitLAN / ftp(3).
- 6
- If another computer needs to be selected, repeat steps 4 and 5.
- 7
- Call up the Main menu.
You can apply the KnitLAN connection to one of the Direct folder selection keys. The key is indicated with the symbol KnitLAN. You can see the contents of the folder on the M1 in the selection field.