Install and test Reverse Online

After a succesful installation of the McNet program you can send information from the Selan terminal of the machine to a M1 pattern workstation.

I. Install Reverse Online:

  1. The McNet program is installed.
  2. Networking is enabled.
  3. The Main Menu of the machine is active.
    1
    Press the Selan button to call up the Selan terminal.
    2
    Press the Shift button to call up additional functions.
    3
    Press the Connect Network button.

    -> The Network Environment dialog box appears.
    4
    Select the M1 pattern workstation in the Entire Network selection window at the left and transfer it into the right selection window with the Insert at the Bottom key.

    Transfer all M1 Pattern-Workstations to the right selection field, for which you want to install a Selan connection.
    5
    Select the desired M1 in the left selection window.
    -> The name of this unit appears bold and in a frame.
    6
    Confirm selection.

    -> The machine will be connected to the M1.
    7
    Press Back key in order to get back to the Selan Terminal.

    -> The Selan Terminal dialog box appears with a selection of menus.
    8
    Enter the digit 15 (Info on M1) via keyboard and confirm with ENTER.

    -> The prompt INFO-TEXT: > appears.
    9
    Enter direct command after the entry prompt.
    Ex: Test of the connection to the M1.
    10
    Confirm the text entry.

    -> This text will be sent to the selected M1 pattern workstation and displayed within the Selan Online dialog box.
    11
    Press the Selan key to terminate the connection.

    -> The Main Menu appears again.