How to load the operating system for the knitting machine from the M1

The operating systems of CMS TC machines can be run by the M1 and can be accessed from the individual machines. This allows the current operating system to be loaded in the machines.
In addition, a directory for operating system files is created upon installation of the M1 software in the pattern workstation. The directory path is: D:\Stoll\M1\Bootfiles\.

Load the new operating system from the directory of the M1 in a CMS-TC machine:

  1. The CMS TC machines must be in a local network with the M1 pattern workstation. Networking of the machine is enabled.
  2. The D:\Stoll\M1\Bootfiles\ directory from the M1 must be configured as boot directory on each of the machines. In other words, it must be permanently connected to the M1 pattern workstation as a network drive Q.
  3. The D:\Stoll\M1\Bootfiles directory from the M1 must be released for the CMS TC machine workgroups.
  4. The CMS-TC machine is in the boot mode.
    1
    Press the Basic Configuration button.
    2
    Select the Boot from Network button.
    3
    Confirm selection.

    -> The STOLL TC START MENU dialogue box appears again.
    4
    Press theInstallation button.
  1. The installation starts and proceeds like the installation from floppy or hard disk.