Set Permissions

For the work steps at the machine, the maintenance staff needs other permissions than the operator (knitter). The operator, for example, may not change any data or perform specific machine actions. You define this in the corresponding user profile.

Requirements:

The selection of a user profile is carried out in several steps:

Select the user group:

    1401
    Tap the button (1).
    In the selection menu select the desired user group.

    1402
    Proceed to the next program step. For this, tap the button (2).

If you tap the button (3) your settings for all user profile will be reset to the STOLL settings (default).

Select the user rights for a menu:

    1403
    Select the desired menu item from the main navigation bar.
    For this, tap the button (4).

    1404
    The selection menu appears.

    1405
    Select the desired menu item.
    These are the menu points from the main navigation bar (at the right screen edge).
    1406
    Select the desired menu item from the lower navigation bar.
    For this, tap the button (5).

    1407
    The selection menu appears.

    1408
    Select the desired menu item.
    These are menu points from the lower navigation bar (at the lower screen edge)
    1409
    Proceed to the next program step.
    For this, tap the button (2).

Selecting user rights for the selected menu:

6

Set accessibility for each control (action, button).

Only possible for the Produce Order menu.

9

Unlock all controls of the selected window.

10

Lock all controls of the selected window.

    1410
    Set accessibility for each control (action, button).
    For this, tap the button (6).
    1411
    The selected menu appears. In the example, the Monitor Order menu is displayed.

    1412
    In this window you can establish the access possibility for each element (action, button). In the example the Switch Off Machine element is selected.
    The selection menu (7) appears.
    1413
    Select the desired setting in the selection menu (unlock, password protected, lock).
    Tap on the corresponding button for this.

Unlock the element

The element is password protected (password of the senior operator required)

Lock the element.
The element is no longer displayed.

    1414
    If necessary, establish the access possibility for further elements. Repeat step 3 for this.
    1415
    Save the settings. For this, tap the button (8).

If necessary, you can establish the access possibility for further menus. For this, repeat the Select the desired menu work step.