Devices
Overview over the add-on equipment available at this machine.
No new add-on equipment can be signed-in in this window. For this purpose, you must switch off and on again the machine and carry out a Restart & Configuration.
|
|
Release or lock feed wheel |
|
|
Release or lock the type of feed wheel.
|
|
|
Release or lock feed wheel |
|
|
Release or lock the type of feed wheel.
|
|
|
The YLC device is present on the machine. |
|
|
The YLC device is present on the machine. |
|
|
After a machine conversion, inform the control unit about how many clamping/cutting points are available. (6, 8, 16, 16/8) |
|
16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.). Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.
|
|
|
Release or lock clamping and cutting points |
|
|
After a machine conversion, inform the control unit about how many clamping/cutting points are available (6, 8, 16, 16/8). |
|
16/8 = With a 16 times clamping and cutting bed, only every second lamping position is used (1, 3, 5, etc.). Use this setting with a double bow plating yarn carrier so that both yarns can be clamped and cut securely.
|
|
|
Release or lock clamping and cutting points |
|
|
The auxiliary take-down is present on the machine. |
|
|
The belt take-down is available on the machine. |
|
|
Central lubrication is available at the machine.
|
|
|
Display of the available yarn carrier drive type. |
|
|
The comb take-down is available on the machine. |
|
|
The suction is available on the machine. |
