Enter feed wheel type

During the first installation of the operating system you are asked which feed wheel type the machine is equipped with.

Enter feed wheel type during the installation:

    1
    Switch the machine main switch off and then on again.
    2
    Tap the button "Installation".
    2. 3
    The installation process is interrupted in the Optional Features menu.
    4
    Select the corresponding feed wheel type for the left-hand (1) and right-hand (2) side of the machine.
    3. 5
    Tap the button Continue (3).
    6
    If the Reference Machine menu appears, the installation of the operating system is completed.
    7
    Carry out a reference run.
    8
    The machine is ready to knit.