Direct commands

W-

Shows all lines from the first line (automatic switch over to the "Sintral-Editor" window)

Wn-

Shows all lines from the line n (automatic switch over to the "Sintral-Editor" window)

Wn-m

Shows the lines n to m (automatic switch over to the"Sintral-Editor" window)

EALL

Deletes everything

LEALL

Deletes protected memory area (library)

EANP

Deletes all machine specific corrections (MC-NPK)

EYLC

Deletes all correction values of yarn length control (on EKC)

YLCx

Deletes all correction values of yarn length control (on OKC)

TP

Test the program

TPn

Test the program from line n

TPW

Tests and displays the program

TPWn

Tests and displays the protocol from line n

SP

Start the program, switch on the memory protection

SP1

Start the program on line 1

SPF

Start the program and fix it on the first knitting row

SPFn

Start the program on line n and fix it there (also possible: SPnF)

<CTRL A>

Cancels text output or TP

<CTRL W>

Interrupts the current knitting pattern cycle, subsequent cycles are knitted as programmed

<CTRL Z>

The machine automatically begins with a new fabric if the following conditions are met:
1. Racking located on home position
2. Yarn carriers located at starting position
3. Carriage direction permits new start
As long as these conditions are not met, cycles (RBEG...REND) will only be knitted once.

OIL=n

Number of system run-throughs (n=1-65535) until message "Lubricate needle bed"

OIL

Input after lubrication of needle beds

OIL?

Query of system run-throughs until the message "Lubricate needle bed"

EX0

Machine and power supply are switched off if piece counter is on 0

EX1

Machine and power supply are switched off after a piece is finished

EXS

Power supply is switched off if the machine stops

EX

Deletes EX0, EX1 or EXS

MIN

Shows running time of the last knitted part (from START...END)

MINSEQ

Displays running time for a complete sequence (also possible: MINSEQ?)

MINSEQEL

Displays running time of the last knitted sequence element (also possible: MINSEQEL?)

DA=

Input of the date and time e.g.: DA=31.10.87 14:10

DA

Query of the date

MC!#n

Sets machine number n (1-9999) for KnitLAN connection

S#n

Switch on shift counter and report n (1-5)

S#n=0

Delete shift counter and report n (1-5)

S#?

Displays contents of the shift counters

SH

Short report, display of last cause of stopping with time.
Example: 3 09:16 means: Stopping due to piece counter = 0.

REPORT

Report

REPORTL

Report on printer

REPORTS

Shows all shift reports on the display

REPORTSL

Printout of all shift reports

REPORT0

Delete report