Machine Data
The machine data include the machine-specific settings (correction values).
They serve for the fine adjustment of the machine. The settings which are specific to the machine always remain saved, even after loading the operating system again.
Enter manually the machine data
If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.
- Factory settings
When delivering the knitting machine, the machine data was printed out and put on the right control cabinet.
- Current settings
You will find the values in the Basic Settings menu.
View Data -> 
System Information -> 
Basic Settings
|
|
Enter the correction value for the upper comb position. |
|
|
Enter manually the correction values fort the three racking types. |
|
|
|
|
|
|
