Update Languages
For the EKC machines, the different languages are saved in the "eknitlang.zip" file.
When are the languages to be updated?
- A new eknitlang file is available
- The eknitlang file has not been installed with the software installation
Preparations
- 1
- Save the current EKC "V_EKC_xxx_STOLL.zip" operating system on your computer.
- 2
- Unpack the "V_EKC_xxx_STOLL.zip" operating system.
-> The "eknitlang.zip" file will be generated. - 3
- Load this file into the machine. Either by means of an USB memory stick or via the network.
- 4
- With an USB memory stick.
Copy this file to the USB memory stick. Insert this stick into the USB socket at the display of the machine.
Install the language
-
Senior Operator - eknitlang.zip is available:
The USB memory stick with the "eknitlang.zip" file is plugged.
- 1
- Open the Time and Language tab.
Configure Machine -> 
System Settings -> 
Time and Language - 2
- Tap the button Update Languages.
Update Languages - 3
- Select the path for the USB memory stick.
Select the drive. - 4
- Select the "eknitlang.zip" file, and confirm with OK.
- The language file will be loaded.
The Data imported successfully.message will appear.