Racking

Enter manually the correction values fort the three racking types.

Normal racking

Basic Correction of Racking

The position of the rear needle bed relative to the front needle bed is set with the VGK value (factory setting).

Correct the Racking Position

Fine adjustment of the racking.

The rear needle bed is aligned exactly relative to the front needle bed.

The VPK value changes the position of rear needle bed - a change has effect on all racking positions.

VL50 – VR50

You can correct each racking position individually.

Transfer Racking

Basic Correction of Transfer Racking to the Left

Fine adjustment of the transfer racking to the left.

Basic Correction of Transfer Racking to the Right

Fine adjustment of the transfer racking to the right.

VL50 – VR50

You can correct each transfer racking position individually.

Half Racking

VL50 – VR50

You can correct each half racking position individually.

Enter manually the machine data

If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.