Setup Mode
This function is only active, if the order consists of two or more positions (knitting programs).
The setup mode serves for fine tuning the individual positions on the machine. For example:
- Set cycle counters
- Adapt WM values and stitch length
- Determine YLC data, when working with a yarn length measuring device (YLC).
အေျခခံ အေျခအေနမ်ားကို ဆံုးျဖတ္ရန္
You can set up one position after the other. In the setup mode the piece counter is automatically set to "1".
- If the fabric is finished, the machine stops (piece counter at 0).
- The message box is opened.
- The message အထည္အားလံုး ၿပီးသြားၿပီ is displayed.
- Tap on the icon အထည္အားလံုး ၿပီးသြားၿပီ.
- The သတ္မွတ္ စနစ္, အေနအထား ေရြးခ်ယ္ၿပီးပါၿပီ menu appears.
- You can select one of the following options:
|
|
To control the fabric, tap this button. အထည္သား ျဖဳတ္ခ်သည့္အပိုင္းက ေရွ႕သို႔ လည္သြားၿပီး အထည္ကြာက်သြားသည္။ |
| Exiting the setup mode. You release the order for production. Then you can release the order for production, |
| The current piece is knitted once again. If necessary, you can repeat this several times. |
| ေအာ္ဒါ၏ အေနအထားေနာက္တစ္ခု (သိုးေမြးထိုး အစီအစဥ္) သို႔ ေျပာင္းပါ။ |
The fabric is pressed off if a knitting program with comb start is used.
