Setting: Fabric Take-down

The purpose of the fabric take-down is to continuously take-down the knitwear the stitch. This way, the stitch loops are hold reliably in the needle hook during the stitch formation process or transfer. The fabric gets stability during the knitting process.

The fabric take-down depends on:

Open the Fabric Take-down Table

  1. You are signed in as Senior Operator .
  2. The knitting program is loaded and the production was started.
  3. In the main navigation bar Set up Order is selected.
    1
    Select Set-up pattern in the bottom navigation bar.
    2
    In the window tap the button with the symbol.
  1. The WMF menu in the Setup Editor is opened.
    3
    Change the value.
    4
    Close Setup Editor with the Close button and return to Set-up Pattern.
  1. The changed values are in Setup and will be stored together with the order when saving it.

- or -

    5
    In the main navigation bar select Produce Order.
    6
    Open Monitor production in the bottom navigation bar.
    7
    Tap the button with the symbol.
  1. Change the value via the number field.

Tab: WBF

WBF…

Belt take-down function

WBF1 to WBF50

Action

WB
Belt speed by millimeters / second [mm/s]

Minimum value: 0
Maximum value: 30
Step width: 0.1

WB^
Release the belt take-down

Minimum value: 1
Maximum value: 3
Step width: 1

WBOPEN
Open the belt take-down

 

Tab: WM

WM%

Modify the value for the main take-down by n percent

-80 to 80

WMK%

Modify the value for the comb take-down by n percent

: The value is only active till the fabric is taken down by the main take-down.