Behavior with an order with several knitting programs

Working procedure:

• Processing of a specified sequence of knitting programs
• The knitting programs are automatically loaded into the main memory of the machine.

Usage:

• Knitting of different patterns with constant knitting width
• Knitting of a pattern with different fabric widths (set of sizes)
• Knitting of different patterns in different fabric widths (fully fashion)
  Example for fully fashion Front, back, sleeve, sleeve.

Requirements:

All the knitting programs used in the order must meet the following conditions:

• Same machine type and working procedure
• All yarn carriers must be present in every knitting program.
  Also draw the unused yarn carriers in the starting rows of the start module.
  Otherwise there is a risk that the clamp will be opened and the not used yarn carrier will be unthreaded. This leads to a machine stop and that is annoying.
• With machines with comb and clamping / cutting:

Home positions of the yarn carriers:

• Knitting programs have the same yarn carrier home position
  : Note:
  EAYSEQ does not need to be performed after each order position (knitting program).
• Knitting programs have different yarn carrier home positions
  : Note:
  EAYSEQ must be performed after each order position (knitting program).
• All yarn carriers must be brought to their home position before END.
  : Recommended for knitting programs with comb use.
• Wit machines without comb and clamping / cutting:

Selected needle area (SEN):

• The SEN area must be the same in all knitting programs

Home positions of the yarn carriers:

• All knitting programs have the same yarn carrier home position
• The EAYSEQ function does not need to be performed after each order position.