Checking protective devices

Check the protective devices:

NGUY HIỂM

Defective protective device!

Death or serious injury.

If a protective device does not stop the machine, it must be stopped for safety reasons and secured against being started up again. Repair must be carried out immediately.

Opened covers and safety doors!

Danger of crushing and cutting by the carriages, racking, fabric take-down, comb take-down and additional beds!

Do not reach into the running machine when the covers and safety doors are open.

Protective device	Checking
Engaging rod (1)	Production setting
Engaging rod (1)	Turn the engagement rod forward and release it. The carriage starts moving. Turn the engagement rod backwards (zero position). The carriage must be stopped immediately.
Covers (2)	Turn the engagement rod forward and release it. The carriage starts moving. Open cover. The carriage must be stopped immediately. Close cover anew. To confirm the error message, tap the following button: Repeat this process for each cover.

Protective device	Checking
Emergency stop pushbutton (3)	Turn the engagement rod forward and release it. The carriage starts moving. Press the emergency stop pushbutton. The carriage must be stopped immediately. The emergency stop pushbutton locks in the OFF position. Pull out the emergency stop pushbutton. To confirm the error message, tap the following button:
Main switch (4) Emergency switching-off switch	Turn the engagement rod forward and release it. The carriage starts moving. Switch off the main switch / emergency switching-off switch (position "OFF"). The carriage must be stopped immediately. The machine must switch off automatically.

Tài liệu về máy dệt của bạn

Bạn có thể tìm thấy tài liệu về máy dệt của mình tại STOLL WEBSHOP.