Threading up collecting clamp unit

    1
    Place the yarn carrier (1) outside the collecting clamp unit.
    The yarn carrier may not be positioned above the collecting clamp unit - risk of damage.
    2. 2
    Take the yarn from the yarn carrier and pull it up to the needle bed (2).
    3
    Hold the yarn.
    4
    Open the Can thiệp Thủ công II menu.
    Sản xuất đơn hàng -> Can thiệp Thủ công II
    5
    In the Can thiệp Thủ công II window tap the Kẹp và cắt button.
    Can thiệp Thủ công II -> Kẹp và cắt
    6
    Tap the button "Clamp 1 is Closed" or "Clamp 2 is Closed".
    Left collecting clamp unit - area (3)
    Right collecting clamp unit - area (4)
    3. 7
    The thread is gripped by the collecting clamp and fixed.
    If there is already a thread fixed in the selected collecting clamp, this thread will be released.
    4. 8
    Tap the button "Cutting left" or "Cutting right".
  4. The thread is cut off.