Adjust the yarn carriers

The yarn carriers are correctly adjusted if

the distance between the cam center of the knitting system and the yarn carrier in each system is identical in both carriage directions
the thread is laid on the open latch at exactly the same point by each yarn carrier for both selvedge needles
the yarn carrier tips (3) move exactly between the needle beds in the needle cross and the distance between yarn carrier tips and the closed needle latch is 0.5 mm to 1 mm

Vertical setting	Loosen screws (1). Push the yarn carrier bow (2) upwards or downwards. Check the position of the yarn carrier tip (3). Retighten the screws (1).
Horizontal setting	Bend the yarn carrier bow (2) carefully (without using force) to the front or to the rear. Check the position of the yarn carrier tip (3).