Counters

#1 - #99

The counters 1-99 are available for any use.
#40 - #99 are deleted with EALL
Setting #1 - #119: from 1 to 99999

 

The following counters will be reset to 0 with START:

 

 

#1 - #39
#46 - #49
#120 - #122
#125 - #134

 

The following counters remain unchanged:

 

 

#40 – #45
#50 - #99

#35

Momentary Jacquard width (number of symbols in the jacquard line)

#41

Identical to #L

#42

Identical to #R

#43

Identical to #LM

#44

Identical to #RM

#46

Identical to #FL

#47

Identical to #FR

#48

Identical to #F1 (widening or narrowing on left side)

#49

Identical to #F2 (widening or narrowing on right-hand side)

Counters for single-piece knitting (see also chapter Fully fashion knitting)

#51

Start-width at the left

#52

Start-width at the right

#53

Start-width middle-left

#54

Start-width middle-right

#55

Auxiliary counters for size correction

#56

Auxiliary counters for size correction

Counters for two-piece knitting (see also chapter Fully fashion knitting)

#55

Left piece: Start-width at the left

#56

Left piece: Start-width at the right

#57

Left piece: Start-width middle-left

#58

Left piece: Start-width middle-right

#59

Right piece: Start-width at the left

#60

Right piece: Start-width at the right

#61

Right piece: Start-width middle-left

#62

Right piece: Start-width middle-right

#63

Auxiliary counters for size correction

#64

Auxiliary counters for size correction

Piece counter and cycle counters

#100 or ST

Piece Counter

#101 or RS1

Cycle counter 1

:

:

#119 or RS19

Cycle counter 19

More counters

From #120 on, the counters can only be read

#120

Which cycle is running

#121

How many times does the active cycle run in total

#122

How many times does the active cycle still have to run

#123

The current program line number

#124

Carriage direction: <<=1, >>=0

#125

Automatic row counter

#126

Automatic course counter

#127

Current JA1 line number

#128

Current JA2 line number

#129

Current JA3 line number

#130

Current JA4 line number

#131

Current JA5 line number

#132

Current JA6 line number

#133

Current JA7 line number

#134

Current JA8 line number

#135

Meters/second multiplied by 100 (e.g. 1.25=125)

#136

Machine number 0...9999

#137

Gauge, e.g. 3...12

#138

Needle number of this gauge, e.g. 996

#139

Machine type (e.g. CMS 400 = 700)

#140

Limit switch of the comb. (0= comb bottom, 1= not bottom, 2= machine without comb)

#141

First fabric piece (SEN1) left fabric selvedge

#142

First fabric piece (SEN1) right fabric selvedge

#143

Second fabric piece (SEN2) left fabric selvedge

#144

Second fabric piece (SEN2) right fabric selvedge

#145

Third fabric piece (SEN3) left fabric selvedge

#146

Third fabric piece (SEN3) right fabric selvedge

#147

Fourth fabric piece (SEN4) left fabric selvedge

#148

Fourth fabric piece (SEN4) right fabric selvedge

#149

Number of knitting systems

#150

Current day of the month (1-31)

#151

Current month (1-12)

#156

Coupling width in inches (tandem machine)

#157

Clamping-cutting function "Y-CR" (0=switched on, 1=off, 2=only right-hand side switched on, 3=only left side switched on)

#196

YLC mode

#197

starting with OKC: Prompt to know whether the sequence knitting is active (#197=1) or not (#197=0)

#198

starting with OKC: Shows how often the current sequence element is still repeated

#199

Auxiliary take-down (1= available, 0= not available)

#210

Number of the shift (1-5) of the user interface

#211

SEN1 left fabric selvedge of the previous pattern

#212

SEN1 right fabric selvedge of the previous pattern

#213

SEN2 left fabric selvedge of the previous pattern

#214

SEN2 right fabric selvedge of the previous pattern

#215

SEN3 left fabric selvedge of the previous pattern

#216

SEN3 right fabric selvedge of the previous pattern

#217

SEN4 left fabric selvedge of the previous pattern

#218

SEN4 right fabric selvedge of the previous pattern

#219

Hour (0-23)

#220

Minute (0-59)

#221

Second (0-59)

 

Configuration Counters

These counters represent the equipment of the machine.

#MCC=0

Clamping and cutting bed on the left and right available

#MCC=1

Clamping and cutting bed on the left and right not available

#MCC=2

Clamping and cutting bed on the right available

#MCC=3

Clamping and cutting bed on the left available

#MTCCW

Coupling width in inches (tandem with comb)

GETTIME

Apply the time to the counters 219, 220 and 221

#MTDSYS=0

No Take-down

#MTDSYS=1

Main Take-down

#MTDSYS=2

Main take-down + Auxiliary take-down

#MTDSYS=3

Main Take-down + Comb

#MTDSYS=4

Main Take-down + Auxiliary Take-down + Comb

#MTDSYS=5

Belt Take-Down

#MTDSYS=6

Belt Take-Down + Comb

Yarn Carrier Counters

These counters represent the parking positions and allocations of the yarn carriers.

#POGS

Parking on the initial side

#PNGS

Parking on opposite to the initial side

#PY[]

Yarn carrier parking within fabric

#IYN

Tracking the yarn carriers

  • 1 = tracked on the left side
  • 2 = tracked on the right side
  • 4 = not yet tracked

YFLP:=

List allowed yarn carriers

YFLN:=

List excluded yarn carriers