Operating modes of BMS 52

Operating mode:

• With Comb
• With collecting clamp unit

Single Piece

• Machine does work in Fully-Fashion mode (PF0 command)
• The fabric is generally positioned in the machine center.
• SEN and F1 define the entire needle bed width
• The #L and the #R counter define the actual knitting width
• Yarn carriers are positioned in the Collecting clamp unit
• Comb is active

Double Pieces

• Machine does work in Fully-Fashion mode (PF0 command)
• Two pieces can be knitted
• SEN1 and F1 define the entire needle bed width
• The #L1 and the #R1 counter define the knitting width of the left piece
• The #L2 and the #R2 counter define the knitting width of the right piece
• Yarn carriers for the left piece in the left collecting clamp unit
• Yarn carriers for the right piece in the right collecting clamp unit
• Comb is active

Operating mode:

• Without Comb
• Without collecting clamp unit

Single Piece

• If there is no fabric in the fabric take-down, the picking-up after pressing-off must be activated before starting the pattern.
• For fully fashion, a special Sintral function is needed, which enables widening or cast-off to achieve the start width of the fabric.
• The yarn carriers are positioned at the left and right fabric selvedge
• Comb and collecting clamp unit are deactivated

Multi-piece

• If there is no fabric in the fabric take-down, the picking-up after pressing-off must be activated before starting the pattern.
• For fully fashion, a special Sintral function is needed, which enables widening or cast-off to achieve the start width of the fabric.
• Up to 4 pieces (SEN1 to SEN4) can be knitted simultaneously.
• Home position of the yarn carriers (YG1 - YG4)
• The yarn carriers are positioned at the left and right fabric selvedge correspondingly
• Comb and collecting clamp unit are deactivated