Setup Mode
This function is only active, if the order consists of two or more positions (knitting programs).
The setup mode serves for fine tuning the individual positions on the machine. For example:
- Set cycle counters
- Adapt WM values and stitch length
- Determine YLC data, when working with a yarn length measuring device (YLC).
Xác định các điều kiện cơ bản
You can set up one position after the other. In the setup mode the piece counter is automatically set to "1".
- If the fabric is finished, the machine stops (piece counter at 0).
- The message box is opened.
- The message Tất cả vật dệt đã kết thúc is displayed.
- Tap on the icon Tất cả vật dệt đã kết thúc.
- The Chế độ cài đặt, Vị trí kết thúc menu appears.
- You can select one of the following options:
|
|
To control the fabric, tap this button. Kéo căng vật dệt quay tới và ném vật dệt ra. |
| Exiting the setup mode. You release the order for production. Then you can release the order for production, |
| The current piece is knitted once again. If necessary, you can repeat this several times. |
| Chuyển sang vị trí tiếp theo (chương trình dệt) của đơn hàng. |
The fabric is pressed off if a knitting program with comb start is used.
