Racking

Enter manually the correction values fort the three racking types.

Normal racking

Chỉnh sửa cơ bản của dịch chuyển

The position of the rear needle bed relative to the front needle bed is set with the VGK value (factory setting).

Chỉnh sửa vị trí dịch chuyển

Fine adjustment of the racking.

The rear needle bed is aligned exactly relative to the front needle bed.

The VPK value changes the position of rear needle bed - a change has effect on all racking positions.

VL50 – VR50

You can correct each racking position individually.

Chuyển giao dịch chuyển

Chỉnh sửa cơ bản của chuyển giao dịch chuyển bên trái

Fine adjustment of the transfer racking to the left.

Chỉnh sửa cơ bản của chuyển giao dịch chuyển bên phải

Fine adjustment of the transfer racking to the right.

VL50 – VR50

You can correct each transfer racking position individually.

Dịch chuyển một nửa

VL50 – VR50

You can correct each half racking position individually.

Enter manually the machine data

If the current values of the machine data have got lost, and there is no dongle data available, then the data can be entered manually.