Import or export machine settings and network drives

You can export the machine settings and import them on other machines.

Machine Settings include the following settings:

Network Drives

  • Path specifications of the network drives
  • NetworkDrives

You will find these settings in the menu:

Конфигуриране Машина -> Системни Опции -> Управление Данни
->

Carriage Speed

  • Specifications for the carriage speed
  • CarriageSpeed
    • Reduced Speed
    • SlowPercent
    • Quantity of knitting rows at reduced speed following a machine stop
    • SlowAfterStopActive
    • Speed Outside the Knitting Area
    • SlowAfterStopRows
    • Speed with Open Covers
    • CoverOpen

You will find these settings in the menu:

Конфигуриране Машина -> Работни Опции -> Шейна

Various operational settings

  • Time after which the lighting of the needle beds will be switched off.
  • Light AutoOffMinutes
  • Knitting program is included in the logfile
  • IncludePatternInLogging
  • Horn (ON, OFF, Intermittent Tone)
  • Horn Active IntrvalActive IntervalSeconds
  • Display of the Run-through Counter
  • ReverseRunThroughCounter
  • Delayed Switch-off in Case of Power Failure
  • PowerFail
  • Technical View
  • UseKnitInfo
  • Relieve the Fabric When Switching off the Machine
  • TakeDownRelieveFabric WithPowerOffActive

You will find these settings in the menu:

Конфигуриране Машина -> Работни Опции -> Разни

Vacuum

  • Specifications for vacuuming
  • Suction OutOfSENActive="True" OffForRows="2" OnForRows="2"
    • Vacuum Off Whole Needle Bed
    • OutOfSENActive
    • Number of courses without suction
    • OffForRows
    • Number of courses with suction
    • OnForRows

You will find these settings in the menu:

Конфигуриране Машина -> Поддръжка -> Вакуум

Clean Selection Systems

  • Direction of Cleaning Row
  • CleanSelectionSystems OptionCurrent
  • Number of courses until the selection systems are cleaned
  • CleanSelectionSystems AfterRows

You will find these settings in the menu:

Конфигуриране Машина -> Поддръжка ->

Manual Lubricating or Central Lubrication

  • Lubricating Manually
  • Oil
    • Quantity of system run-throughs after which the needle bed should be manually oiled
    • AfterSystemRunThroughs
    • Machine stop after the maximum quantity of system run-throughs is reached.
    • NoStopMotion
  • Central Lubrication
  • Lubrication Active
    • Quantity of system run-throughs until oiling the knitting area
    • UserDefined_AfterSystemRunThroughs
    • Quantity of lubrication processes after which the entire needle bed will be lubricated
    • UserDefined_ProcUntilAllNeedles

You will find these settings in the menu:

Конфигуриране Машина -> Поддръжка -> Смазване

Show Locked Menus

  • Show or hide locked menus
  • ShowLockedMenuButtons

You will find this setting in the menu:

Конфигуриране Машина -> Системни Опции -> Потребител -> Задава Разрешения за Достъп

Waiting time for the screen saver

  • Waiting time for the screen saver
  • ScreenSaver Timeout

You will find this setting in the menu:

Конфигуриране Машина -> Системни Опции-> Екран

Proceed as follows:

    1
    Make machine settings at a machine.
    2
    Export the machine settings.
    3
    Import the machine settings on the other machines.
    4
    All machines are working with the same machine settings.

Export the machine settings

Конфигуриране Машина -> Системни Опции
-> Трансфер Данни -> Настройки Машина

The machine settings are exported with the following file name:
machinesettings.xml

Import the Machine Settings

During the import, you can choose if you want to import individual settings or all of them.

If a setting is inactive (1), it will not be imported, since this setting is not available in this machine (e.g. central lubrication).

Конфигуриране Машина -> Системни Опции
-> Трансфер Данни -> Настройки Машина