Bc machine - Value range for the delivering position changed

Command =^(n)=

Up to now: 0…25

New: 0…100

The delivering position (n) of the fabric (comb take-down - belt take-down) can be set lower by a maximum of 100 millimeters. This way, short fabrics and fabrics that tend strongly to winding, can later be delivered to the belt take-down.

If you use a higher value (26 - 100) you insert it manually in the Sintralprogram, for example: =^(100)=

If you load the changed knitting program on a machine with comb but without belt take-down, then the error message Comb delivering position outside -22..25 appears.