Clean suction and lint container (CMS 830 S)

    1
    Stop knitting machine when carriage is located on right half of needle bed.
    2
    Slide on cover over needle bed.
    3
    Push locking of lint container inwards and pull away container upwards.
  1. Lint container and filter
    2. 4
    Empty the lint container.
    5
    Clean filter (1) of lint container.
    6
    Reinstate the lint container.
    7
    Swivel the central lubrication on the left side of the carriage into the mounting position.
    8
    Swivel the holder outwards with a screwdriver until the holder can be pulled out of the carriage.
  2. Suction tube
    3. 9
    Blow out the brush on the suction tube with compressed air.
    10
    Reassemble the suction tube with the holder. Press both lock positions of the holder tightly into the carriage.
  1. The holder is correctly engaged, if it clicks twice.