Direct commands (Clamping and cutting)

KPLn=m

Correction of the home position of the yarn carrier on the left thread clamping and cutting device (remains active after EALL).
n = clamp 1-16
m = value
Value range: -16...0...16. Standard: 0
Step width: 1=1/16 inch=1.6 mm
as of OKC: Step width: 0.5=1/32 inch=0,8 mm)

KPRn=m

Correction of the stopping position of the yarn carrier on the right thread clamping and cutting device (remains active after EALL).