Enclose the Weft Yarn by Stitch (CMS-W, Qs)

Yarn Carrier Type Qs

Enclose the weft yarn by stitch
Enclose the weft yarn by stitch

Schematic representation of the knitting situation

The weft yarn is inserted by the separate system (S1).
The weft yarn is inserted by the separate system (S1).

Create pattern

    1
    Draw basic pattern.
    2
    Define a plating color.
    Open the Plating (1) dialog box.
    2. 3
    For plating color P1, the following specification (2) is necessary:
    Column 1: weft yarn carrier "Qs"
    4
    Draw-in the weft yarn (3) into the pattern (Float).
    3. 5
    The weft yarn will be enclosed in the following row (4) (Stitch).

The following settings are required in addition:

Control column

Weft Yarn

Enclosing Row

Sequence of Technical Rows

Icon (3a)

Icon (4a)

Both these rows are done by one carriage stroke.

Presser Foot

—

Switch-on the presser foot (4b)

Presser Foot Correction

—

Carriage direction to the left (4c)

Carriage direction to the right (4d)

These settings are not absolutely necessary.

Notice:
The yarn carrier will automatically be moved out of this area if the correction value would cause a collision.