Shape counters absolute
Manual entry of the needle quantity with Fully Fashion
- For a pattern change
- when you want to restart the fabric, e.g. after a fabric drop.
Използвайте тази функция само за следните режими на работа:
- Машина без гребен
- Машина с гребен, но без използването му
The manual entry is necessary, if the SEN area does not start with the needle 1.
In the example, the fabric starts with the needle 121, see the field Точно (иглено легло).
For the machine to be able to adjust automatically to the new knitting width (widening or narrowing) it needs the position of the first and the last needle of the previous pattern.
For doing this, proceed as follows:
- 1
- Check on the machine where the first and the last needle of the previous pattern are located.
- 2
- In the "Absolutely (needle bed)" field, enter and confirm the position of the first needle in the "#L" field.
- 3
- Enter and confirm the position of the last needle in the "#R" field.
- 4
- The machine compares the counter of the previous knitting program with the counter in the new knitting program and can execute accordingly the function F: FF-TransF:
- 5
- When starting the new knitting program, the machine adjusts itself automatically to the new knitting width.
Програмата трябва да е създадена като окроена такава на M1plus .