Replace display (CMS 502)

Assembly with CMS 502

The cables are fastened with cable ties. To remove the cables, cut the cable ties.

In the conversion kit you will find new cable ties. Fasten the new cables with it.

1

Stop carriage at the left reversal.

2

Disconnect machine main switch.

3

Disconnect three cables from the display.

Remove the screws (1) and remove the complete display from the machine.

4

Pull the cables backwards to the rear of the machine.

5

Remove the cables out of the cable guide.

6

Disconnect the three cables from the control cabinet.

7

Screw the new display onto the display holder.

Assemble the display holder onto the machine.

Plug in the new cables.

The blue cable is connected to the central socket (arrow).

8

Pull the cables to the rear of the machine and lay them into the cable guide.

Lead the cables to the front side of the right control cabinet.

9

Work on the right control cabinet:

  • Replace electronic card (9).
    Pull out the current card (IPC, ID 301039 or 301 046) and replace it with the new card (ID 275 384).
  • Plug the following cables into the new card (ID 275 384).
    • Cable (10) (blue) (internal Ethernet)
    • Display cable (XR_70)
  • External Ethernet
    If the machine is networked, plug the cable (11) (customer network) and the cable (13) into the adapter (12).