Pattern design technique on the M1plus

Patterning of Devoré (1 system)

  1. M1plus version V7.0 or higher.
    1
    Open a new pattern.
    2
    Select machine.
    3
    Open the System functions tab of the MC-Attribute dialog box.
    4
    Select the converted knitting system in the Knitting System section.
    5
    Select the Devoré (1 system) option in the System Functions section under Cam Box Modification.
  1. In the Cam box functions section the system functions are automatically adjusted.
    2. 6
    Confirm with OK.
    7
    Open the Plating dialog box with .
    8
    Define a plating color by yarn carrier colors .
    For the plating color P1 the following specifications are necessary:
    Column 1: Yarn carrier 8 for the binding thread
    Column 2: Yarn carrier 7 for the motif thread
    9
    Allocate the desired plating index to the yarn carrier colors.
    10
    Close the Plating dialog box with .
    11
    Draw pattern.
    Watch-out the devoré motif being processed on the rear needle bed.
    Draw with the following needle actions:
    - Rear Stitch: Resulting "Stitch-Stitch"
    - Rear Tuck: Resulting "Stitch-Float"
    - Float: Resulting "Float-Float"
    12
    Enter Devoré (1 system) rear into the System function control column.
    13
    Execute the Start technical processing function.
    14
    Check the knitting program with the Sintral Check.

If the message Sintral commands "~" for Devoré (1 system) and "SX" may not be used in common. appears:

  1. Browse the knitting program and Sintral functions where the Sintral command "SX" appears.
  2. Replace the SX command by S1 or S3.

Recommended for Devoré (1 system):