Thread up the Yarn Carriers after Yarn Breakage

DANGER

danger

Danger by moving carriage

Danger of crushing and cutting by the carriage.

With production: Thread up yarn carriers after yarn breakage.

    1
    Open covers.
    2
    Thread up the yarn through the yarn guide star and yarn carrier head.
    3
    Lay-in the thread in the needle head using a knitting hook.
    4
    Lead the yarn end opposed to the carriage direction.
    5
    Hold the yarn end outside the danger zone(carriage)
    6
    Pull the engaging rod to position 2 (reduced speed) keeping the carriage in view.
  1. The carriage moves with reduced speed, if a slower speed was set under Speed with Covers Open [MSECCO] and if the button is activated.

 

    7
    Release the engaging rod when the thread is fixed in the fabric and the position is accessible.
    8
    Cut-off the yarn end.
    9
    Close the covers and continue production.