Direct commands

W-	Shows all lines from the first line (automatic switch over to the "Sintral-Editor" window)
Wn-	Shows all lines from the line n (automatic switch over to the "Sintral-Editor" window)
Wn-m	Shows the lines n to m (automatic switch over to the"Sintral-Editor" window)
EALL	Deletes everything
LEALL	Deletes protected memory area (library)
EANP	Deletes all machine specific corrections (MC-NPK)
EYLC	Deletes all correction values of yarn length control (on EKC)
YLCx	Deletes all correction values of yarn length control (on OKC)
TP	Test the program
TPn	Test the program from line n
TPW	Tests and displays the program
TPWn	Tests and displays the protocol from line n
SP	Start the program, switch on the memory protection
SP1	Start the program on line 1
SPF	Start the program and fix it on the first knitting row
SPFn	Start the program on line n and fix it there (also possible: SPnF)
<CTRL A>	Cancels text output or TP
<CTRL W>	Interrupts the current knitting pattern cycle, subsequent cycles are knitted as programmed
<CTRL Z>	The machine automatically begins with a new fabric if the following conditions are met: 1. Racking located on home position 2. Yarn carriers located at starting position 3. Carriage direction permits new start As long as these conditions are not met, cycles (RBEG...REND) will only be knitted once.
OIL=n	Number of system run-throughs (n=1-65535) until message "Lubricate needle bed"
OIL	Input after lubrication of needle beds
OIL?	Query of system run-throughs until the message "Lubricate needle bed"
EX0	Machine and power supply are switched off if piece counter is on 0
EX1	Machine and power supply are switched off after a piece is finished
EXS	Power supply is switched off if the machine stops
EX	Deletes EX0, EX1 or EXS
MIN	Shows running time of the last knitted part (from START...END)
MINSEQ	Displays running time for a complete sequence (also possible: MINSEQ?)
MINSEQEL	Displays running time of the last knitted sequence element (also possible: MINSEQEL?)
DA=	Input of the date and time e.g.: DA=31.10.87 14:10
DA	Query of the date
MC!#n	Sets machine number n (1-9999) for KnitLAN connection
S#n	Switch on shift counter and report n (1-5)
S#n=0	Delete shift counter and report n (1-5)
S#?	Displays contents of the shift counters
SH	Short report, display of last cause of stopping with time. Example: 3 09:16 means: Stopping due to piece counter = 0.
REPORT	Report
REPORTL	Report on printer
REPORTS	Shows all shift reports on the display
REPORTSL	Printout of all shift reports
REPORT0	Delete report