Report Data

The control collects all operating data recorded since the operating system was first read in and since the current knitting program was started.

Show Report Data:

  1. You are signed in as Senior Operator .
  2. Knitting program is loaded.
    1
    Select View Data in the main navigation bar.
    2
    Open Report Data in the bottom navigation bar.
  1. The following menu will be shown.

1

 

Button to open the selection menu:

  • Report:
    Data since the first loading of the operating system in the Stoll factory (not deletable)
  • Report 0:
    Collect operating data for a specific time period
  • Report for Shift n (n=1-5)
    Collect operating data for each shift individually

2

Button to delete the displayed table

3

SIN

Working time of the control unit (SINTRAL loaded)

RUN

Time of Production

V=V

Stop Stopping at the engaging rod

/-\

Stop Yarn control device, yarn feed

000

Stop Piece counter

>!

Stop Stop by resistance

- / )

Stop Position needle sensor

%

Stop Fabric take-down

PR

Stop Programming

MS~

Machine stop or brief power failure

- > /

Stop Shock stop motion

V[ ]

Racking Error

# <>

Total number of strokes

#ML

Number of strokes at reduced speed

ST

Quantity of produced fabrics

4

Quantity

1. Column: Total quantity of each error

2. Column: Percentage specification of the respective error

5

Time

1. Column: Stand still time of the respective error

2. Column: Percentage specification of the stand still time of the respective error