Assembling the carriage (CMS W)

Put the carriage part on

If the front carriage part is returned to the machine, it needs to be pushed from outside on to the support surface (1). The reason for this: The movable parts in the clamping and cutting bed will be pushed by the carriage part (more exactly: by the cam box curve) into their correct positions.

Support surface of carriage part
Support surface of carriage part
    1
    Push the carriage part from outside onto the support surface (1).
    2
    To prevent the weave-in devices from colliding with the support (5), shift by hand all weave-in devices (4) into their upper position (out of operation).

As you have shifted the weave-in devices by hand, a weave-in device reference run may be necessary.
If this is the case, then an error message will appear on the display.