Setup Mode
This function is only active, if the order consists of two or more positions (knitting programs).
The setup mode serves for fine tuning the individual positions on the machine. For example:
- Set cycle counters
- Adapt WM values and stitch length
- Determine YLC data, when working with a yarn length measuring device (YLC).
Determine basic conditions
You can set up one position after the other. In the setup mode the piece counter is automatically set to "1".
- If the fabric is finished, the machine stops (piece counter at 0).
- The message box is opened.
- The message All Fabrics Finished is displayed.
- Tap on the icon All Fabrics Finished.
- The Setup Mode, Position finished menu appears.
- You can select one of the following options:
|
|
To control the fabric, tap this button. |
| Exiting the setup mode. You release the order for production. Then you can release the order for production, |
| The current piece is knitted once again. If necessary, you can repeat this several times. |
| Switch to the next position (knitting program) of the order. |
The fabric is pressed off if a knitting program with comb start is used.
