Monitor Order

	Production data of the Entire Order
	1	Running Time of the order
	2	Display of the production progress for the order
	3	Number of the current position (knitting program)
	4	Quantity of run-throughs Number of times that the list of positions (knitting programs) is repeated. Example: Run-through 1 of 4 (see image) The list is repeated four times in total. Currently the list is knitted for the first time.
	Production data of the current position (knitting program)
	3	Number of the position (knitting program)
	5	Name of the knitting program
	6	Remaining running time
	7	Display of the production progress for the current position
	8	Displays the following information: Quantity of the completed fabrics for this position Total piece quantity for this position + = Quantity of the fabrics to be re-knitted, Icon
	8	Tap here to re-knit fabrics. Re-knitting
	9	List which program parts (.sin, .jac, .setx) are used in this position.
	10	Number and name of next position
	11	Number and name of previous position

Send Message

Opens the dialog box to send a message to the Senior Operator or the maintenance staff.

Stop Machine

Stopping of the machine when the set condition is fulfilled.

If you tap on the icon , you can select one of the following options:

You will find further possibilities for a conditional stop under:
Intervene Manually I -> Stop Machine

Switch Off Machine

Switching off of the machine when the set condition is fulfilled.

If you tap on the icon , you can select one of the following options:

With Stop
Switching off the knitting machine after a stop.
With Stop after X Hours
Enter the waiting time prior to switching off the machine after a stop.
Once the Current Fabric Is Finished
Once the Order Is Finished

If you tap on the icon , you can select one of the following options:

With Stop
After a stop, the standby mode is switched on.
With Stop after X Hours
Enter the waiting time until the standby mode is switched on after a stop.
Once the Current Fabric Is Finished
Once the Order Is Finished