Safety Instructions for Lubrication, Cleaning and Maintenance

Danger of crushing and cutting by the carriage, the autarkic yarn carriers, the racking, the needle beds, the clamping and cutting devices.

Switch off machine at main switch.

Secure the machine against being switched on again.

After working on the rear of the machine, close the sliding boards again.

Cleaning with compressed air

Observe the country-specific laws and regulations.

Risk of soiling - do not blow directly into the motor.

Recommendation:
In order to avoid any dust being deposited on the inaccessible points of the machine, we recommend that the dust should be vacuum cleaned and the machine not to be cleaned by compressed air.

Caution:
Damage of needles!
The spring-mounted needle latches will be damaged if the needles are blown out with compressed air.
Always vacuum fluff and dust off the needles, never blow them out.

Health hazard

When working with oil and grease, pay attention to the safety regulations (safety data sheets) applicable to the respective product!

Observe the manufacturer's specifications (safety data sheet).

Environment pollution

Ensure that oil and grease is correctly disposed of in an environmentally responsible manner!

Observe the country-specific laws and regulations.

Observe the manufacturer's specifications (safety data sheet).