Connecting the knitting machine (Component types 000 and 001)
|
Valid for: | |||||
|---|---|---|---|---|---|
|
Component type 000 - 001 |
CMS 933 |
CMS 830 C |
CMS 740 |
CMS 530 T |
CMS 520 |
|
CMS 922 |
CMS 822 |
CMS 730 S |
CMS 530 |
CMS 420 E (type 575, 577) | |
|
|
|
CMS 730 T |
CMS 520 C | ||
DANGER
Life-threatening high voltage!
Electrical shock may cause death or serious injuries.
- Deenergize on-site mains supply.
The knitting machine is connected in the following steps:
- Measuring the mains voltage
- Setting the transformer and protective motor switch to the mains voltage
- Connecting the mains supply to the main switch
- Adapting the fluff absorption to the mains frequency
Authorized personnel
The knitting machine must be connected by an electrician. Country-specific laws and regulations are to be followed.
Operating the knitting machine with a generator
If the knitting machine is operated with a generator, make sure that the voltage supplied by the generator meets the requirements of the EN 60204-1, Parag. 4.3.1.
In case of queries, please call the Stoll Helpline.