Adapting fluff absorption to mains frequency

Depending on the mains frequency (50 Hz or 60 Hz), the fluff absorption operates with or without sealing plugs.

Adapting fluff absorption
Adapting fluff absorption

The fluff absorption can be damaged if the mains frequency is not adapted!
The fluff absorption is overloaded if it is not adapted to the mains frequency.
-> Adapt the fluff absorption to the mains frequency.

    1
    Open the rear panel segments.
    2
    Check the sealing plugs (4) of the suction unit.
    3
    At Mains frequency 50 Hz: Insert sealing plug.
    -  or  -
    At Mains frequency 60 Hz: Remove sealing plug.
    4
    Close the rear panel segments.