Mounting the yarn guide device

Push the supports of the yarn guide device upward together with another mechanic to prevent the supports from jamming.

  1. The main switch is set to 0 and secured against being switched on again.
    1
    Open the lateral safety doors and loosen the screws (1) on both sides of the machine.
  1. Supports for the yarn guide device
    2. 2
    Push the left and right supports of the yarn guide device upward simultaneously until the support and the edge (2) are aligned.
    3
    Retighten the screws (1) on both sides of the machine.

Mounting the rear track of the yarn guide device and the additional bobbin boards

The additional equipment of your machine can deviate from this description depending on the machine type (type of machine, scope of supply, special equipment).

    1
    Loosen the screws (1) on both machine sides.
    2. 2
    Position the yarn guide device horizontally and retighten the screws (1).
    3
    Remove the screws (2) on the left and right sides of the machine.
    4
    Position the rear track (3) of the yarn guide device horizontally.
    5
    Reinsert the screws in the position (4) and tighten them.
    6
    Mount and hook-in the additional bobbin boards.