Racking specifications for the additional beds (CMS 730 T, CMS 330 TC-T)
|
VZV<n |
Front additional needle bed racks n needles to the left (n=1,2,3...) |
|
VZ^<n |
Rear additional needle bed racks n needles to the left (n=1, 2, 3...) |
|
VZV>n |
Front additional needle bed racks n needles to the right (n=1, 2, 3...) |
|
VZ^>n |
Rear additional needle bed racks n needles to the right (n=1, 2, 3...) |
|
VZV0 |
Racking front additional needle bed to position 0, home position |
|
VZ^0 |
Racking rear additional needle bed to position 0, home position |
|
VZVRn |
racking front additional needle bed right to position n, e.g. VZVR1 |
|
VZ^Rn |
racking rear additional needle bed right to position n, e.g. VZ^R1 |
|
VZVLn |
racking front additional needle bed left to position n, e.g. VZVL1 |
|
VZ^Ln |
Racking rear additional needle bed left to position n, e.g. VZ^L1 |
|
VZVKn>m |
Racking correction n (A-Z) of front additional needle bed by m steps (0-10) to the right (>) or left (<) |
|
VZ^Kn>m |
Racking correction n (A-Z) of rear additional needle bed by m steps (0-10) to the right (>) or left (<) |
|
VZVKn |
Racking correction identical to previous correction n (A-Z) for front additional needle bed |
|
VZ^Kn |
Racking correction identical to previous correction n (A-Z) for rear additional needle bed |
|
VZV+n |
Additional to racking specification: Racking of front additional needle bed will make an extra movement of n value (1-24) (+n) or in the opposite direction (-n) and then return immediately. |
|
VZ^+n |
Additional to racking specification: Racking of rear additional needle bed will make an extra movement of n value (1-24) (+n) or in the opposite direction (-n) and then return immediately. |
|
VVZV=n |
Racking speed of front additional needle bed n (1-32), without any specification VVZV=32 |
|
VVZ^=n |
Racking speed of rear additional needle bed n (1-32), without any specification VVZ^=32 |