Specific commands - CMS 9xx (OKC)

W0n

Fabric take-down value = 0, fabric take-down impulse n (0-15), e.g. W05

WM^n,m ¹

Open the brake of the active take-down system (main take-down or comb take-down) for a maximum of 2,5 seconds, take-down roller or comb take-down turn back by a maximum number of degrees m (depending on the fabric tension and the fabric take-down value n). If either of both the conditions is fulfilled, then the anti-run-back device is closed again.
m=9-120 degrees, fabric take-down value (n=0-31.5) is active immediately after closing the anti-run-back device.

WM^n ¹

Special case of WM^n,m. Equivalent to WM^n,120

WM^n,m,M ¹

The brake of the active take-down system (main take-down or comb take-down) is open, powered turn-back of the take-down roller or the comb take-down by m degrees, regardless of the fabric tension, close the anti-run-back device again.
m=9-120 degrees, fabric take-down value (n=0-31.5) is active immediately after closing the anti-run-back device.

WM- ¹

Open the anti-run-back device

WM+ ¹

Close the anti-run-back device

WS1 ¹

Fabric sensors on

WS0 ¹

Fabric sensors off