Export / import machine data

Reasons to export (save) machine data (dongle):

Content of dongle data:

Dongle-Data is saved in a file with the name: Machine number. smc (Stoll-Machine-Configuration data).

Possible data medium for saving:

Export machine data:

  1. You are signed in as Senior Operator .
    1
    In the main navigation bar switch to Configure Machine.
    2
    Select System Settings in the bottom navigation bar.
    3
    Open the Data Transfer tab.

1

Selection menu for the data type for data transfer

  • Operating System
  • Knitting Programs
  • PIN and Permissions
  • Shift Plan
  • Machine Data
  • Machine Settings
  • Report Data
  • Sintral Crypto Key File (only with EVP-Extended Value Package)

2

Selection of the external location regarding the target directory

  • F:\ [USB]
  • Network Drive

3

Button to perform the data transfer Export

 

    4
    Open the menu under Select data type.
    5
    In the selection menu, select the Machine data.
    6
    Under External Save Location specify the desired target directory.
    7
    Press the Export data button.
  1. The dongle data is exported to the specified target directory.

Load machine data (import):

    1
    Switch off machine.
    2
    Switch on machine at the main switch.
  1. The machine boots until the System Control Unit (SCU) menu appears.
    1
    In the menu System Control Unit tap the Service button.

1

Export (Save) the logfiles

2

Import (load) the Dongle data to the machine

3

Export (save) the Dongle data from the machine

4

Reset to default settings of Stoll

 

    1
    Press the Load Machine Configuration button.
  1. The Dongle data are loaded.