Needle Bed Distance


Distancia entre fonturas

Make settings for the Needle Bed Distance

You have the following options in the context menu:

to

Select directly entry 1 to 3 from the Distancia entre fonturas tab of the Parámetros de muestra.

Pre-defined standard entries
These cannot be deleted or edited.

  • Small (1)
    Approximately the same distance as the standard machine.
  • Medium (2)
    Approximately the same distance as the multi gauge machine.
  • Large (3)
    Approximately the same distance as the k&w machine.

  • Sintral: NBD=n-m
    • n = front needle bed
    • n = rear needle bed
    • Value range: 0.00-10.00 mm
  • Example:
    30 << S:R-0;    Y:0;   NBD=2.20-3.50  S1 S2 S3

et seq.

Select directly an entry from the Distancia entre fonturas tab of the Parámetros de muestra.

Estándar

Sets the setting on Estándar.

Applies the entry of the default setting from the header row.

Eliminar

Deletes the entry.

Mostrar en tabla

Opens the Distancia entre fonturas tab of the Parámetros de muestra.

There you can make further settings and then apply them to the pattern.

Mostrar información rápida

  • Show ToolTips