Needle Bed Distance


Distanza fra le fronture

Make settings for the Needle Bed Distance

You have the following options in the context menu:

to

Select directly entry 1 to 3 from the Distanza fra le fronture tab of the Parametri del disegno .

Pre-defined standard entries
These cannot be deleted or edited.

  • Small (1)
    Approximately the same distance as the standard machine.
  • Medium (2)
    Approximately the same distance as the multi gauge machine.
  • Large (3)
    Approximately the same distance as the k&w machine.

  • Sintral: NBD=n-m
    • n = front needle bed
    • n = rear needle bed
    • Value range: 0.00-10.00 mm
  • Example:
    30 << S:R-0;    Y:0;   NBD=2.20-3.50  S1 S2 S3

et seq.

Select directly an entry from the Distanza fra le fronture tab of the Parametri del disegno .

Impostazione predefinita

Sets the setting on Impostazione predefinita.

Applies the entry of the default setting from the header row.

Elimina

Deletes the entry.

Mostra in tabella

Opens the Distanza fra le fronture tab of the Parametri del disegno .

There you can make further settings and then apply them to the pattern.

Mostra descrizione comandi

  • Show ToolTips