Create order menu

  1. You are signed in as Senior Operator.
  2. The Set up Order -> Edit Order window is selected.
     
    1
    In the Edit Order window tap the Create New Order button.
    2. 2
    The Create New Order window appears.
    3. 3
    Select the desired knitting program (1). It is highlighted in color.
    4
    Tap the button (2) repeatedly, until the menu item Order Menu (3) is chosen.
    5
    The Order Menu window appears.
    4. 6
    Fill in line by line.

ST1= Number of pieces to be produced, if "ST1=0" then this line will not be taken into consideration

ST2= already produced pieces

Modify cycle counters or counters:

Tap on the column header in the header (4) and choose the desired setting.

Do not use the counters #1 to #39, as they are set to "0" during start-up!

Enter the ST2 value simultaneously in all lines.

  1. Tap on the column header ST2.
  2. Enter the desired value.
  3. Confirm the entry with. For this, tap the Apply Value to all Rows button.
  4. The value is entered in all lines.
    7
    If you entered all specifications into the list, tap the button  Create Order.
    2. 8
    The window is closed and the window Edit Order is displayed.

It continues with the section "Produce order menu".