ADF-machine with cam box conversion for Devoré (1 system)
1
Open a new pattern.
2
Select machine.
3
Open the Machine Attributes tab.
4
Select Devoré (1 system) setting in the System Functions section under System Conversion.
In the System Functions section, the system functions are automatically adjusted.
5
Confirm the prompt with OK.
6
Open the Plating Colors tool window. Plating Colors
7
Define a plating color by Yarn Carrier Colors. Plating Color P1: Column A: Yarn carrier color 8 for the binding thread Column B: Yarn carrier color 7 for the motif thread
8
Allocate the necessary plating index to the yarn carrier colors.
9
Draw pattern. Watch-out the devoré motif being processed on the rear needle bed. Draw with plating color and the following needle actions:
10
Enter Rear Stitch only.
Resulting "Stitch-Float"
11
Enter Motif Thread at Rear and Rear Stitch.
Resulting "Stitch-Stitch" for motif thread and binding thread.
Example:
12
Entry the Devoré (1 system) rear function in the System Function control column.
13
Execute Technical
Processing
14
Check the knitting program with the Sintral Check.
Recommended for Devoré (1 system):
Use yarn carriers of inner yarn carrier tracks. Example for ADF 32:
Yarn carrier 8 for the binding thread
Yarn carrier 7 for the motif thread
Set the plating index (YPI) in the Setup Editor.
Leading (binding thread) Insertion Position: -1.0 Height: -1.3
Following (motif thread) Insertion Position: 8.0 Height: 0